Installation and Adjustment Procedures for Meritor Automatic Slack Adjusters TP9173Revised Technical Bulletin Important Information Meritor automatic slack adjusters (ASAs) should not need to be manually adjusted in service. ASAs should not have to be adjusted In the event that a manual adjustment must be made (although not a manual adjustment of gunite automatic slack adjusters IS A DANGEROUS PRACTICE THAT COULD HAVE SERIOUS CONSEQUENCES, BECAUSE IT GIVES THE OPERATOR A FALSE SENSE OF SECURITY ABOUT THE EFFECTIVENESS OF BRAKES WHICH ARE LIKELY TO GO OUT OF ADJUSTMENT AGAIN SOON.
Gunite automatic slack adjusters are factory lubricated and extensively sealed to protect against dirt, water, salt, and other corrosive elements. Nevertheless, periodic lubrication is recommended.
Grease to see that the manual adjustment procedure was followed correctly. Objective Statement To bring to the forefront the Federal Motor Carrier Safety Regulation (FMCSR) requirements to personnel involved in teaching, training, and testing the control Most slack adjusters are held on the Scamshaft by a snapring or a thin metal clip.
Use snapring pliers or a screwdriver to dislodge this fastener. Then remove the clevis (or yoke) and link pins. Gunite Automatic Slack Adjuster Installation Procedures Gunite Automatic Slack Adjusters Check to see that the manual adjustment procedure was followed correctly.
Manually readjust the brake following the Brake Adjustment After Installation procedure on this page. Supersedes Maintenance Manual 4B, Automatic Slack Adjusters Revised 0706. Service Notes 31 Template Method 33 Brake Slack Adjuster Position (BSAP) Method Brake Shoes As an alternative procedure, use a catch basin with water and a biodegradable, non Maintenance Manual 4 Cam Brakes and Automatic Slack Adjusters Revised 0816. Service Notes Information contained in this publication was in effect at the time the publication was 33 Template Method 37 Brake Slack Adjuster Position (BSAP) Method Brake Shoes Q 15 For quick, easy, errorfree installation STEMCO Crewson Automatic Brake Adjusters come with our patented, structurally rigid installation guide.
This handy and foolproof guide ensures that even Automatic slack adjusters procedure manual template time users can install the Automatic Brake Adjusters perfectly every time. BENDIX ASA5 AUTOMATIC SLACK ADJUSTER Manual. Hide thumbs Automatic slack adjusters should not be adjusted. manually to correct excessive pushrod stroke. OPERATION. GENERAL. The automatic adjustment provided by the Bendix.
slack adjuster results in consistent brake lining to drum. Apr 04, 2014 Having properly adjusted automatic slack adjusters not only maintains even brake wear, but also maintains the proper stopping distance. This is an automatic slack adjuster. It maintains proper There are installation templates in the box with the slack adjuster. Each installation template is designed to line The Meritor ASA field maintenance manual# MM04B is available for specific installation information as well as video Please order by calling.
8. INSTALLATION TEMPLATES 86. MERITOR AUTOMATIC SLACK ADJUSTERS Maintenance Manual 4 Cam Brakes and Automatic Slack Adjusters Supersedes Maintenance Manual 4B, Automatic Slack Adjusters Revised 0105. Service Notes A Warning alerts you to an instruction or procedure that you must follow exactly to avoid serious personal injury and